 |
 |
| Electronic appropriation film |
|
| PCB/FPCB release film |
|
| Back-adhesive joint release film |
|
| FFC release film |
|
| Fluorine plastic release film |
|
| Trans-print release film |
|
| polytef isolated film |
|
| Release Films |
|
| PTFE films for your wire and cable needs |
|
| PTFE adhesive fabric and tape |
|
|
| Acrylic A2100 A2300 |
|
| Silicone Rubber |
|
| kapton胶带/PI胶带 |
|
| PVC Foam |
|
| PORON |
|
|
| Reinforced Solid Rubber |
|
|
| CR/EPDM |
|
| Nortite CR |
|
| EPDM |
|
|
|
|
|
| System of fluids |
|
| FURON |
|
| High Purity Valves |
|
| FURON |
|
Specification： Describe：
|
|
|
Furon A2 Pumps are pneumatically-operated, driven by two reciprocating PTFE bellows. Their oscillation frequency is much lower than an equivalent diaphragm pump, resulting in an extended life and reduced cost of ownership. All Furon A2 Pump wetted components are manufactured from high purity PTFE and PFA, making the pumps suitable for handling even the most aggressive concentrated chemicals. All other (non-wetted) components are manufactured from advanced engineering thermoplastics such as ETFE and PEEK to ensure no possibility of ionic contamination, even in the event of a bellows failure. Furon A2 Pumps are also 100% elastomer free, using our highly reliable No O-Ring sealing technology throughout. This substantially reduces the chance of contamination due to a failed O-Ring as well as reduces the maintenance costs. Our pumps are self-priming, providing an easy installation and setup. In addition, the Furon A2 Pumps feature our innovative shuttle valve fixation technology, allowing us to provide three different driving systems to adapt our pumps to the customer’s requirements |